An Easy Way to Transfer Patterns
Many of you might be having an artistic approach towards life and would love to make use of this art during your leisure time. A craft book is a great way to improve your skills with all the innovative ideas and steps at your fingertips. Transferring patterns is also a craft work that requires your time and skills.
You need to have craft supplies, piece of material, transfer paper, craft tools, a transfer pencil, iron and ironing board.
While you work on a hard surface, you need to trace the entire design with the help of your transfer pencil. You should try to keep the pressure of your stroke even all the way around the design to ensure a good transfer because if it is too light you won’t be able to see the lines of the design when you begin the project. You are about to transfer a reverse image of the one you have just printed. If the design is reversible then nothing matters but if it is not then you need to trace the image with your transfer pencil onto the other side of paper and remember that the side you trace shall face down on the material to be ironed.
Next you have to lift the pattern from the material which is ready for the project and could be used again.
Now cut a square around your pattern and for this it is better to work with a small piece of paper when you want to transfer the pattern to material with an iron. You have to position the pattern face down on the piece of material you are using for your project and then hold the pattern in place tightly with one hand and iron firmly and consistently over the pattern with your medium heated iron.
Next set the iron aside and hold all but one corner of the pattern in place tightly with one hand and you can lift the free corner to check if the design is showing up dark enough. If it is not still dark, iron consistently in your coverage of the pattern till you get satisfactory results.